Dandong Foundry
About Us Casting Products Casting Workshop Machining Workshop Inspection Certificate Blog Articles Contact Us
 
CASTING WORKSHOP:
Small Automatic Molding
Large Automatic Molding
Resin Sand Molding Line
Green Sand Molding Line
Shell Molding Casting
Lost Wax Silica Sol Cast
Lost Wax Water Glass Cast
 
 
 
 

 

 
 
 
Large Automatic Static Pressure Molding Line
 

 

The automatic static pressure molding line is an advanced molding line, which could guarantee higher dimensional tolerance and better surface quality.

Its molding flask is 1000*800mm, which means it could produce any iron castings less than one meter long. With other two FBO molding lines, the total production volume could reach 30,000 tons each year.

This molding line is suitable for producing ductile iron and gray iron castings with high requirements and short production lead time. 

Next >> Resin Sand Molding Line

Home Page  |  Contact Us
   

     © DANDONG FUDING ENGINEERING MACHINERY CO., LTD.  All Rights Reserved
     ADD: No.117, Zhenyang Street, Qianyang Town, Dandong City, Liaoning, P.R. China
     SITEMAP | China Foundry