|  | 
			ASTM A536 100-70-03, 
			EN-GJS-700-2, GGG70, Ductile Iron, SG Iron Chemical Composition, Mechanical and Physical Properties
ASTM A536 100-70-03 (EN-GJS-700-2, GGG70) 
			is a type of high tensile strength ductile cast iron (SG cast iron, 
			nodular cast iron) material grade. It has 
			comparatively high tensile strength, and good abrasive resistance. So, 
			this cast iron grade is suitable to produce mechanical parts with 
			high duty. Our dandong foundry has producing this 
			material grade for many years, and herein, we share its chemical 
			composition, mechanical and physical properties. 1. Equivalent 
			Material Grades of Ductile Iron 
			ASTM A536 100-70-03 The equivalent grades of ASTM A536 
			100-70-03 are EN-GJS-700-2, GGG70, ISO 700-2, QT700-2, FCD700, 
			GS700-2, FGS700-2, FGE70-2, FNG70-2, SJK-700. Although some required 
			elongation 3%, and some required 2%, but their other properties are 
			the same, so they could be taken as the equivalent grades. 2. 
			Chemical Composition of Ductile Iron ASTM A536 100-70-03 C: 3.60-3.90, Si: 1.70-1.90, Mn: 0.30-0.50, P: 
			< 0.06, S: 
			< 0.03, Mg: 0.035-0.050. However, this 
			range can not be taken as the standard of inspection, unless there 
			is special requirement. All foundries could adjust their chemical 
			composition as long as they could meet the mechanical requirements 
			of standards. 3. Mechanical & 
			Physical Properties of Ductile Iron  
			ASTM A536 100-70-03 Tensile Strength ≥ 700 MPa. Yield 
			Strength ≥ 420 MPa. Elongation ≥ 3%. As for equivalent grades EN-GJS-700-2, 
			GGG70, ISO 700-2, QT700-2, FCD700, GS700-2, FGS700-2, FGE70-2, 
			FNG70-2, SJK-700, their elongation ≥ 3%. There is no strict stipulation to the 
			hardness of ASTM A536 100-70-03, however, normal hardness range should be 
			220 - 320 HB. (Brinell Hardness) without heat treatment. 4. 
			Main Application of Ductile Iron 
			ASTM A536 100-70-03 Because of the high tensile strength, 
			hardness and good abrasive resistance, this grade of ductile cast 
			iron could be used to produce crank shaft, axle, camshaft, main 
			shaft of milling machine and lathe machine, high duty manhole 
			covers, 
 
			Home | 
										 
							More Articles |  |