| |
AISI 1015 SAE UNS G10150
Carbon Steel Foundry
Steel foundry in China for producing
AISI 1015 SAE UNS G10150 Carbon Steel castings. The followings are
this material's chemical composition, physical and mechanical
properties and equivalent material grades.
The following
datasheet provides an overview of AISI 1015 carbon steel.
Chemical
Composition
The chemical
composition of AISI 1015 carbon steel is outlined in the following
table.
|
Element |
Content
(%) |
|
Iron,
Fe |
99.13-99.57 |
|
Carbon,
C |
0.13-0.18 |
|
Manganese, Mn |
0.30-0.60 |
|
Sulfur,
S |
≤ 0.050 |
|
Phosphorous, P |
≤ 0.040 |
Physical Properties
The following
table shows the physical properties of AISI 1015 carbon steel.
|
Properties |
Metric |
Imperial |
|
Density |
7.87
g/cc |
0.284
lb/in³ |
Mechanical Properties
The mechanical
properties of the cold drawn AISI 1015 carbon steel are displayed in
the following table.
|
Properties |
Metric |
Imperial |
|
Tensile
strength |
385 MPa |
55800
psi |
|
Yield
strength |
325 MPa |
47100
psi |
|
Bulk
modulus (typical for steel) |
140 GPa |
20300
ksi |
|
Shear
modulus (typical for steel) |
80.0
GPa |
11600
ksi |
|
Elastic
modulus |
190-210
GPa |
27557-30458 ksi |
|
Poisson's ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (In 50 mm) |
18.00% |
18.00% |
|
Reduction of area |
40.00% |
40.00% |
|
Hardness, Brinell |
111 |
111 |
|
Hardness, Knoop (converted from Brinell hardness) |
129 |
129 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
64 |
64 |
|
Hardness, Vickers (converted from Brinell hardness) |
115 |
115 |
|
Machinability (based on AISI 1212 steel as 100 machinability.
The machinability of Group I bar, rod, and wire products can
be improved by cold drawing.) |
60 |
60 |
Thermal Properties
The thermal
properties of AISI 1015 carbon steel are given in the following
table.
|
Properties |
Metric |
Imperial |
|
Thermal
expansion co-efficient (@0.000-100°C/32.0-212°F) |
11.9
µm/m°C |
6.61
µin/in°F |
|
Thermal
conductivity (estimated based on similar materials) |
51.9 W/mK |
360 BTU
in/hr.ft².°F |
Other Designations
Equivalent
materials to AISI 1015 carbon steel are listed in the following
table.
|
AMS
5060 |
ASTM
A29 |
ASTM
A510 |
ASTM
A512 (1015, MT 1015) |
ASTM
A830 |
|
ASTM
A519 (1015, MT 1015) |
ASTM
A545 |
ASTM
A549 (1015) |
ASTM
A575 (M1015) |
ASTM
A576 |
|
ASTM
A635 |
ASTM
A659 (1015) |
ASTM
A787 (MT 1015) |
ASTM
A794 |
ASTM
A513 (MT 1015) |
|
SAE
J1397 |
SAE
J403 |
SAE
J412 |
SAE
J414 |
ASTM
A108 |
|
FED
QQ-S-698 (C1015) |
MIL
SPEC MJL-S-16974 |
|
|
|
Applications
AISI 1015 carbon steel can be used in forged, cold-headed or
cold-formed parts which are low strength with wear resistant and
hard surfaces.
Home |
More Articles |
|
