|
AISI 1006 SAE UNS G10060
Carbon Steel Foundry
Steel foundry in China for producing
AISI 1006 SAE UNS G10060 Carbon Steel castings. The followings are
this material's chemical composition, physical and mechanical
properties and equivalent material grades.
The features of
AISI 1006 carbon steel are mainly softness and ductility. The
following datasheet will provide more details about AISI 1006 carbon
steel.
Chemical
Composition
The following
table shows the chemical composition of AISI 1006 carbon steel.
|
Element |
Content (%) |
|
Iron,
Fe |
99.43-99.75 |
|
Manganese, Mn |
0.25-0.40 |
|
Carbon,
C |
0.080 |
|
Sulfur,
S |
0.050 |
|
Phosphorous, P |
0.040 |
Physical Properties
The physical
properties of AISI 1006 carbon steel are outlined in the following
table.
|
Properties |
Metric |
Imperial |
|
Density |
7.872
g/cm3 |
0.2844
lb/in³ |
Mechanical Properties
The mechanical
properties of AISI 1006 cold drawn carbon steel are tabulated below.
|
Properties |
Metric |
Imperial |
|
Tensile
strength |
330 MPa |
47900
psi |
|
Yield
strength (depending on temper) |
285 MPa |
41300
psi |
|
Elastic
modulus |
190-210
GPa |
27557-30458 ksi |
|
Bulk
modulus (typical for steel) |
140 GPa |
20300
ksi |
|
Shear
modulus (typical for steel) |
80.0
GPa |
11600
ksi |
|
Poisson’s ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (in 50 mm) |
20% |
20% |
|
Reduction of area |
45% |
45% |
|
Hardness, Brinell |
95 |
95 |
|
Hardness, Knoop (converted from Brinell hardness) |
113 |
113 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
55 |
55 |
|
Hardness, Vickers (converted from Brinell hardness) |
98 |
98 |
|
Machinability (based on AISI 1212 steel as 100 machinability)
The machinability of group I bar, rod, and wire products can
be improved by cold drawing) |
50 |
50 |
Thermal Properties
The thermal
properties of AISI 1006 carbon steel are tabulated below.
|
Properties |
Metric |
Imperial |
|
Thermal
expansion co-efficient (@0.000-100°C/32-212°F) |
12.6
µm/m°C |
7
µin/in°F |
Other Designations
Equivalent
materials to AISI 1006 carbon steel are:
AMS 5041
ASME 5041
ASTM A29
ASTM A510
ASTM A545
FED QQ-W-461
MIL SPEC
MIL-S-11310 (CS1006)
SAE J403
SAE J412 (1005)
SAE J414
Applications
AISI 1006 carbon steel is primarily used in applications
which require hard bending and welding such as panels for appliances
or automobiles. AISI 1006 carbon steel can also be used in magnet
core applications.
Home |
More Articles |
