EN-GJS-600-3, DUCTILE CAST IRON GGG60
EN-GJS-600-3 is a
ductile cast iron grade in
which is equivalent to GGG60 in Germany standard
DIN 1693. The followings are its
other equivalent grades, chemical composition, mechanical properties
and iron castings.
EN-GJS-600-3, GGG60 Equivalent Material Grades
This grade is equivalent to the
following material grades:
ISO 1083 600-3
USA ASTM A536 80-60-03
Japan JIS G5502 FCD600
Italy UNI 4544 GS600-2
France NF A32-201 FGS600-2
UK BS 2789 600/7
India IS 1865 SG600/3
Spain UNF FGE60-2
Belgium NBN 830-02 FNG60-2
Australia AS 1831 600-3
Sweden SS 14 07 0732-03
EN-GJS-600-3, GGG60 Mechanical Properties
The tensile strength is min. 600 Mpa.
The yield strength is min. 370 Mpa.
The elongation is min. 3%.
The hardness range is 180-270 BH.
There is no requirement for impact property.
EN-GJS-600-3, GGG60 Chemical Composition
The suggested chemical compositions in
different standards are very different, so chemical composition is
just for iron foundries to control the quality, but can not be taken
as quality inspection standard. As long as the material could meet
the mechanical properties, they will be taken as qualified.
EN-GJS-600-3, GGG60 Material
Ductile cast iron GGG60 has high tensile strength, middle ductility
and plasticity. It also has good wear resistance and shock
absorption properties. So, its comprehensive material properties are
Moreover, it has good casting process performance, and could be heat
treated to improve the microstructure and mechanical properties.
However, there are high requirements to the mechanical properties,
especially high pearlite content for heat treatment.
EN-GJS-600-3, GGG60 Iron Castings
Dandong Foundry could produce this grade and meet its high
requirements. The followings are some iron castings manufactured by
this material grade.