| |
AISI 1019 SAE UNS G10190
Carbon Steel Foundry
Steel foundry in China for producing
AISI 1019 SAE UNS G10190 Carbon Steel castings. The followings are
this material's chemical composition, physical and mechanical
properties and equivalent material grades.
The following
datasheet will discuss about AISI 1019 carbon steel in detail.
Chemical
Composition
The chemical
composition of AISI 1019 carbon steel is outlined in the following
table.
|
Element |
Content
(%) |
|
Iron,
Fe |
98.71-99.16 |
|
Manganese, Mn |
0.70-1 |
|
Carbon,
C |
0.14-0.20 |
|
Sulfur,
S |
≤ 0.050 |
|
Phosphorous, P |
≤ 0.040 |
Physical Properties
The physical
properties of AISI 1019 carbon steel are tabulated below.
|
Properties |
Metric |
Imperial |
|
Density |
7.87
g/cm3 |
0.284
lb/in3 |
Mechanical Properties
The following
table shows mechanical properties of the cold drawn AISI 1019 carbon
steel.
|
Properties |
Metric |
Imperial |
|
Tensile
strength, ultimate |
455 MPa |
66000
psi |
|
Tensile
strength, yield |
379 MPa |
55000
psi |
|
Modulus
of elasticity |
190-210
GPa |
29700-30458 ksi |
|
Bulk
modulus (typical for steel) |
140 GPa |
20300
ksi |
|
Shear
modulus (typical for steel) |
80 GPa |
11600
ksi |
|
Poissons ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (in 50 mm) |
15% |
15% |
|
Reduction of area |
40% |
40% |
|
Hardness, Brinell |
131 |
131 |
|
Hardness, Knoop (converted from Brinell hardness) |
150 |
150 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
73 |
73 |
|
Hardness, Vickers (converted from Brinell hardness) |
136 |
136 |
|
Machinability (based on AISI 1212 steel. as 100
machinability) |
70 |
70 |
Thermal Properties
The thermal
properties of AISI 1019 carbon steel are given in the following
table.
|
Properties |
Metric |
Imperial |
|
Thermal
conductivity (typical steel) |
51.9 W/mK |
360 BTU
in/hr.ft2.°F |
Other Designations
Other
designations that are equivalent to AISI 1019 carbon steel include
the following:
ASTM A29
ASTM A510
ASTM A513
ASTM A519
ASTM A545
ASTM A548
ASTM A576
SAE J403
SAE J412
SAE J414
Applications
AISI 1019
carbon steel is suitable for manufacturing wire rods.
Home |
More Articles |
|
