Dandong Foundry
About Us Casting Products Casting Workshop Machining Workshop Inspection Certificate Blog Articles Contact Us
 

Bearing Housing Casting

Bearing housing can be made by made by cast iron, some are by cast steel, forged steel, stainless steel, aluminum and even by plastic.

There are many types of bearing housings, such as pillow block bearing housing, pressed steel bearing housing, plain bearing housing, plummer block bearing housing etc.

Pillow block bearings is a mounted bearing which is used to provide load support for a rotating shaft with the mounting surface on a parallel line with the axis of the shaft. The selection of the appropriate bearings can be completed based on the shaft size and the requirements of radial and thrust load. Elongated bolt holes in the base or feet of the unit allow for some adjustment and it is easy to mount the pillow block bearing.

Whether original to the equipment or as a replacement or not will be the key in selecting the right pillow block with dimensions and measurements of pillow block bearings. The shaft diameter is matched with the appropriate corresponding bore dimensions of the bearing unit. If a properly sized unit matching the shaft is selected, the bearing will easily slide onto the shaft and into position and ready to be secured by the locking device. Shaft height also be called backing height is determined by measuring the distance from the base (or bottom) of the pillow block to the center of the inner ring or shaft. At last, the distance between the bolt hole centers is taken from the center of one elongated bolt hole to the center of the other bolt hole of housing.

Dandong Foundry in China has produced some cast iron and cast steel bearing housings exported to the clients overseas. Their main products are cast iron bearing housing, Flange bearing housing, Sand casting iron Bearing Housing.

The following is some information for their bearing housing products:

Material: grey iron, ductile iron, cast steel.
Weight from 1 Kg to 1000 Kg.
radial clearance and axial clearance are be adjusted.
Good surface, Tight tolerance, Fast delivery.
Standard: GB, AISI, BS, DIN, ASTM.
Production capacity: more than 100 tons per month.
Surface treatment: plating, shot blasting, sand blasting.

Home | More Articles

 

   © DANDONG FUDING ENGINEERING MACHINERY CO., LTD. All Rights Reserved.
  
SITEMAP | Iron Foundry, Automatic Molding, Green Sand Casting, Resin Sand Casting, Shell Molding, Iron Castings, Steel Castings, Gray Iron Casting, Ductile Iron Casting, Cast Iron Price, Casting